RQT6530
19
Listening operations
1
2
3
TAPE
VOLUME
DOWN
UP
B
OPEN
2
3
1
/
/
REW/ ,
/ FF
OPEN
c
DEMO
Cassette tapes
1
Press [
c
OPEN], insert a cassette with the
tape facing in.
When the button is pressed, the unit comes on
automatically.
Make sure the cassette is fully inserted and close the
lid by hand.
2
Press [
3
TAPE ] to start playback.
3
Adjust the volume.
To stop tape playback
Press [
L
/–DEMO].
One-touch play
When the system is OFF and a cassette is already inserted,
play starts automatically when you press [
3
TAPE].
Fast-forward and rewind
Press [
4
4
4
4
4
/REW/
g
] (rewind) or [
3
3
3
3
3
/FF/
f
] (fast-forward)
in the stop mode.
Cassette tape selection and care
Types of tapes which can be played correctly.
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I
✓
HIGH POSITION/TYPE II
✕
METAL POSITION/TYPE IV
✕
High position and metal position tapes can be played, but
the unit will not be able to do full justice to the characteristics
of these tapes.
• Tapes exceeding 100 minutes are thin and can break or
get caught in the mechanism.
• Tape slack can get caught up in the mechanism and
should be wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving
parts if used incorrectly. Always read the instructions
provided with your tapes.
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from
there. Each press increases the number of tracks skipped,
up to a maximum of 9.
Press [
4
4
4
4
4
/REW/
g
] or [
3
3
3
3
3
/FF/
f
] during play.
Notes
The TPS function searches for silent parts of about 4
seconds in length which are normally found between tunes.
As a result, it may not function properly in the following
cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
Forward side
Insert inside the
guides
RQT6530(16-22).p65
5/9/2002, 6:41 PM
19
