RQT6530
26
Listening operations
Using the timers
Using the play/record timer
By remote control only
To check settings
While the unit is on and the “
r
PLAY” (or “
r
REC”) indicator is
on, press [CLOCK/TIMER] so “
r
PLAY” (or “
r
REC”) appears
on the display.
Two seconds after “
r
PLAY” (or “
r
REC”) appear, the settings
are displayed in the following order:
•
For play timer
•
For record timer
1
Play start time
1
Recording start time
2
Play finish time
2
Recording finish time
3
Play source
3
Recording source
4
Playback volume
You can check the settings even when the system is OFF by
pressing [CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is
completed
The volume level (for play timer) and music source are stored
in the timer memory and the timer will start in these preset
conditions. However, the CD numbers do not get stored in
the timer memory.
1. After step 4, start playing the desired source.
2. Reset the CD numbers if you have changed any of them,
confirm that a CD or cassette is inserted, then press [
f
] to
put the unit on standby.
Note
• If you turn the unit off and on again while a timer is
functioning, the finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be
in the standby mode.
• If AUX is selected as the source, when the timer comes on,
the system turns on and engages AUX as the source. If
you want to playback or record from a connected unit, set
the other unit’s timer to the same time. (See the other unit’s
instruction manual.)
SLEEP
-AUTO OFF
CLOCK/
TIMER
PLAY/
REC
1
2
3
DISC
4
5
6
≥
10
7
8
9
0
DISPLAY
DIMMER
AUX
TUNER
TAPE
CD
PLAY MODE
/
PROGRAM
/REW/
/FF/
/CLEAR
MUTING
S SOUND EQ PRESET EQ
VOLUME
CLOCK/
TIMER
ALBUM
Timers and others
RQT6530(23-27).p65
5/9/2002, 6:45 PM
26
