background image

4

VQT4T91

Accessories

About Bluetooth

®

Frequency band used

This unit uses the 2.4 GHz frequency band.

Certification of this device

This system conforms to frequency restrictions 
and has received certification based on 
frequency laws. Thus, a wireless permit is not 
necessary.

The actions below are punishable by law in some 
countries:
– Taking apart or modifying the unit.
– Removing specification indications.

Restrictions of use

Wireless transmission and/or usage with all 
Bluetooth

®

 equipped devices is not guaranteed.

All devices must conform to standards set by 
Bluetooth SIG, Inc.

Depending on the specifications and settings of a 
device, it can fail to connect or some operations 
can be different.

This system supports Bluetooth

®

 security 

features. But depending on the operating 
environment and/or settings, this security is 
possibly not sufficient. Transmit data wirelessly to 
this system with caution.

This system cannot transmit data to a Bluetooth

®

 

device.

Range of use

Use this device at a maximum range of 10 m 
(33 ft). The range can decrease depending on 
the environment, obstacles or interference.

Interference from other devices

This unit may not function properly and troubles 
such as noise and sound jumps may arise due to 
radio wave interference if this unit is located too 
close to other Bluetooth

®

 devices or the devices 

that use the 2.4 GHz band.

This unit may not function properly if radio waves 
from a nearby broadcasting station, etc. is too 
strong.

Intended usage

This unit is for normal, general use only.

Do not use this system near an equipment or in 
an environment that is sensitive to radio 
frequency interference (example: airports, 
hospitals, laboratories, etc).

Check the supplied accessories before using this 
unit.

1 Remote control (with a battery)

(N2QAYC000091)

1 AC power supply cord

(K2CB2CB00022)

Wall mounting accessories

1 Screw

(XTB3+8JFJK-J)

1 Safety holder

(RGQ0660-K)

2 Wall mount brackets

(RMQX1082-S)

(ONLY FOR CANADA)

The enclosed Canadian French label sheet corresponds to the 
English display on the top of the unit.

 

Do not use AC power supply cord with other equipment.

Product numbers provided in this Owner’s Manual are 
correct as of December 2012. These may be subject to 
change.

Panasonic bears no responsibility for data 
and/or information that is compromised 
during a wireless transmission.

SC-NE1_PPC~VQT4T91.book  4 ページ  2012年12月19日 水曜日 午後4時43分

Summary of Contents for SC-NE1

















Reviews: