8
VQT4T91
Sound adjustment
The following sound effects can be added to the
audio output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [
3
,
4
] to select the setting and then
press [OK].
* This function can also be selected with the [D.BASS] button
on the unit.
≥
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
Others
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select “SLEEP”.
2
Press [
3
,
4
] to set the time (in minutes) and
then press [OK].
“SLEEP 30”
,.
“SLEEP 60”
,.
“SLEEP 90”
,.
“SLEEP 120”
^--------------------.
“OFF” (Cancel)
(--------------------J
≥
The remaining time is indicated on the unit’s display
except when other operations are performed.
The brightness of this unit’s display can be
changed.
1
Press [SETUP] repeatedly to select “DIMMER”.
2
Press [
3
,
4
] to select “ON” and then press
[OK].
≥
To cancel the dimmer, select “OFF” in step 2.
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for approx. 30 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select
“AUTO OFF”.
2
Press [
3
,
4
] to select “OFF” and then press
[OK].
≥
To turn automatic standby on, select “ON” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1
Press [
, AUX] to select “AUX”.
2
While pressing and holding [
/ AUX] on the
unit, press and hold [SOUND] on the remote
control until the unit’s display shows
“REMOTE 2”.
3
Press and hold [OK] and [SOUND] on the
remote control for at least 4 seconds.
≥
To change the mode back to “REMOTE 1”, repeat the steps
above but replace the button pressed on the remote control
from [SOUND] to [
, AUX].
Direct-Vocal
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or
“OFF”.
≥
The factory preset is “OFF”.
Preset EQ
(PRESET EQ)
“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥
The factory preset is “HEAVY”.
Bass (BASS) or
Treble (TREBLE)
Adjust the level (
j
4 to
i
4).
Dynamic Bass*
(D.BASS)
“ON D.BASS” or
“OFF D.BASS”.
≥
The factory preset is
“ON D.BASS”.
Sleep timer
Display brightness
Automatic standby
Changing the unit and remote
control code
SC-NE1_PPC~VQT4T91.book 8 ページ ２０１２年１２月１９日 水曜日 午後４時４３分
