10
RQT9834
Step 2 Placement
Supplied components
Commercially available components (not supplied)
≥
Fall prevention cord............................................................................................................................
k
2
≥
Screw eyes (to attach the fall prevention cord) ..................................................................................
k
2
≥
Use commercially available screws that are capable of supporting over 33 k
g
.
≥
Use a cord that is capable of supporting over 33 k
g
(with a diameter of about 1.5 mm).
Attach the cord to the safety holder.
Attach the safety holder to the main unit.
≥
Screw tightening torque: 80 N
0
cm to 120 N
0
cm.
When placing the main unit in a
rack or on a table
∏
2 Safety holders
∏
2 Screws with washer
A
Safety holder (supplied)
B
Cord
C
Thread the cord through the holes.
Refer to the operating instructions of the
cord for details.
D
Screw with washer (supplied)
≥
Tighten securely.
E
Safety holder (supplied)
F
Projecting part
≥
The safety holder is placed
diagonally.
SC-HTB527EGEB_RQT9834-B.book 10 ページ ２０１２年１２月１０日 月曜日 午前１１時２９分
