Getting started
Operations
RQT9834
17
Operations
Using this system
Preparation
≥
Turn on the active subwoofer.
≥
Turn on the TV and/or connected device.
Press [
Í
] to turn on the main unit.
Press [TV] or [BD/DVD] to select the
audio source.
≥
If you have selected [BD/DVD], make sure to
select the TV’s input channel for this system and
start the playback.
≥
If there is sound coming out of the TV’s speakers, reduce the
volume of the TV to its minimum.
≥
The maximum volume of the TV and this system may be
different.
≥
If the main unit is turned off with the volume setting in the
greater half (above 50), the main unit will automatically lower
the volume to the middle (50) when the main unit is turned on
(Volume limitation).
To turn this function off, refer to page 21.
Press [
i
VOL
j
] to adjust the volume.
≥
Volume range: 0 to 100
Press [
i
SUBWOOFER
j
] to adjust the
subwoofer level.
≥
Subwoofer levels: 1 to 4
A
The indicators blink from left to right (
i
) or from
right to left (
s
) while adjusting.
≥
The indicators will not blink when it has reached
the maximum or minimum.
Press [MUTE].
A
The indicators blink simultaneously while
muting.
≥
To cancel, press the button again or adjust the volume.
≥
Muting is cancelled if the main unit is turned off.
Press the button for the current audio
source ([TV] or [BD/DVD]).
≥
The current audio format is indicated for 4 sec.
A
Lights when Dolby Digital is the audio format
B
Lights when DTS is the audio format
C
Lights when PCM or LPCM is the audio format
≥
The audio format status is also indicated for 4 sec if the audio
format on the selected source (TV, Blu-ray Disc/DVD Player,
etc.) is changed.
If this system does not operate as expected
or sound is unusual, returning the settings
to the factory preset may solve the problem.
(
>
21)
1
2
To adjust the volume/
subwoofer level
To mute the sound
To display the current audio
format
TV
BD/DVD
DTS
PCM
D
A
A
B
C
SC-HTB527EGEB_RQT9834-B.book 17 ページ ２０１２年１２月１０日 月曜日 午前１１時２９分
