background image

Reference

RQT9690

31

About Bluetooth

®

Frequency band used

This unit uses the 2.4 GHz frequency band.

Certification of this device

This system conforms to frequency restrictions and has 
received certification based on frequency laws. Thus, a 
wireless permit is not necessary.

The action below are punishable by law in some 
countries:

j

Taking apart or modifying the unit.

j

Removing specification indications.

Restrictions of use

Wireless transmission and/or usage with all Bluetooth

®

 

equipped devices is not guaranteed.

All devices must conform to standards set by Bluetooth 
SIG, Inc.

Depending on the specifications and settings of a 
device, it can fail to connect or some operations can be 
different.

This system supports Bluetooth

®

 security features. But 

depending on the operating environment and/or 
settings, this security is possibly not sufficient. Transmit 
data wirelessly to this system with caution.

This system cannot transmit data to a Bluetooth

®

 

device.

Range of use

Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment, 
obstacles or interference.

Interference from other devices

When other devices use the same frequency as this 
system, this system may operate incorrectly or the 
sound may be distorted.

To prevent interference from other devices:

j

Keep the system away from other devices that emit 
radio frequency interference.

j

Do not use this system and a wireless LAN device at 
the same time. Switch off any wireless LAN device.

Intended usage

This unit is for normal, general use only.

Do not use this system near an equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc).

Unit care

Clean the system with a soft, dry cloth

When dirt is heavy, wring a cloth moistened in water 
tightly to wipe the dirt, and then wipe it with a dry cloth.

When cleaning the system, use a fine cloth. Do not use 
tissues or other materials (towels, etc.) that can fall 
apart. Small grains may get stuck inside the speaker 
cover.

Never use alcohol, paint thinner or benzine to clean the 
system.

Before using chemically-treated cloth, carefully read the 
instructions that came with the cloth.

Panasonic bears no responsibility for data 
and/or information that is compromised 
during a wireless transmission.

Manufactured under license from Dolby Laboratories. 
Dolby, Pro Logic, and the double-D symbol are trademarks 
of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 
5,956,674; 5,974,380; 6,487,535 & other U.S. and 
worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together are 
registered trademarks & DTS Digital Surround and the DTS 
logos are trademarks of DTS, Inc. Product includes 
software.
© DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries.

HDAVI Control™ is a trademark of Panasonic Corporation.

VIERA Link™ is a trademark of Panasonic Corporation.

EZ Sync

®

 is a trademark of Panasonic Corporation.

The Bluetooth

®

 word mark and logos are owned by the 

Bluetooth SIG, Inc. and any use of such marks by 
Panasonic Corporation is under license. Other trademarks 
and trade names are those of their respective owners.

SC-HTB450_RQT9690_mst.book  Page 31  Wednesday, February 1, 2012  5:58 PM

Summary of Contents for SC-HTB450





































Reviews: