9
RQT9709
3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥
Use a spirit level to ensure both wall mount brackets are
level.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
.
4
Fix the safety holder onto the unit with the screw
(supplied).
{.
Screw tightening torque: 50 N
0
cm to 70 N
0
cm.
5
Attach the fall prevention cord (not supplied) to this
unit.
≥
Use a cord that is capable of supporting over 33 k
g
(with a diameter of about 1.5 mm).
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥
Connect the DAB antenna and the AC mains lead to the
unit before hanging the unit onto the wall. (
>
10)
≥
After hanging the unit, release your hand carefully to
confirm the unit sits securely on the wall.
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the
wall.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
.
≥
Refer to step 3 for requirements before screwing.
8
Attach the fall prevention cord (not supplied) to the
wall.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
.
≥
Make sure that the slack of the cord is minimal.
At least 30 mm
‰
7.5 mm to
‰
9.4 mm
‰
4 mm
Wall mount bracket
Screw
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to
the wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC57DB~RQT9709-1B.book Page 9 Friday, March 2, 2012 3:31 PM
