background image

16

RQT9709

You can preset up to 20 DAB/DAB+ stations.

Preparation

Press [RADIO] repeatedly to select “DAB/DAB+”.

1

While listening to a DAB broadcast
Press [OK].

2

Press [

3

,

4

] to select the desired preset channel 

number and then press [OK].

 

You cannot preset stations when the station is not 
broadcasting or when the secondary service is selected.

The station occupying a channel is erased if another station 
is preset in that channel.

Listening to preset DAB/DAB+ stations

Preparation*

1

1

Press [RADIO] to select “DAB/DAB+”.

2

Press [PLAY MENU] repeatedly to select 
“TUNEMODE” and then press [OK].

3

Press [

3

,

4

] to select “PRESET” and then press 

[OK].

1

Press [RADIO] to select “DAB/DAB+”.

2

Press [

:

/

6

] or [

5

/

9

] to select the 

station.

 

To select by preset, make sure that stations have already 
been preset manually.

To add additional preset stations, select the station using the 
method mentioned in “Listening to the memorised stations” 
(

>

15).

Some DAB/DAB+ stations provide a secondary service 
as well as the primary service. If the station you are 
listening to is providing secondary service, “

” will be 

displayed.

1

While “

” is displayed.

Press [PLAY MENU] repeatedly to select 
“DAB SECONDARY” and then press [OK].

2

Press [

3

,

4

] to select the secondary service and 

press [OK].

 

The setting will go back to primary service when changes are 
made (e.g. the station is changed).

Press [DISPLAY] to change the display.

The information will scroll through the display.
Each time you press the button:

If the DAB broadcast includes time information, this 
unit’s clock will be automatically updated.

1

Press [PLAY MENU] repeatedly to select “AUTO 
CLOCK ADJ” and then press [OK].

2

Press [

3

,

4

] to select “ON ADJUST” and then 

press [OK].

 

Select “OFF ADJUST” to turn the automatic clock adjustment 
function off.

To check the signal reception quality, at least 1  
frequency block needs to be successfully memorised.

If “SCAN FAILED” is displayed after “DAB/DAB+” is 
selected or after an auto scan, proceed to “Manually 
tuning 1 frequency block” (

>

below)

If stations have already been memorised to this unit, 
proceed to “Checking the DAB/DAB+ signal 
reception quality” (

>

17)

Manually tuning 1 frequency block

Use this function to scan 1 frequency block after 
adjusting the position of the DAB antenna.

Preparation

Note down a frequency block that can be received in 
your region (e.g., 12B 225.648 MHz).

1

While “SCAN FAILED” is displayed.
Adjust the position of the DAB antenna.

2

Press [PLAY MENU] repeatedly to select 
“TUNEMODE” and then press [OK].

3

Press [

3

,

4

] to select “MANUAL” and then press 

[OK].

*

1

4

Press [

3

,

4

] to select the frequency block that is 

receivable in your region and then press [OK].

*1:  The “TUNEMODE” setting is memorised until it is changed.

Presetting DAB/DAB+ stations

Listening to the secondary 
service

Display

Dynamic label:

Information about the broadcast

PTY display:

Programme type

Ensemble label:

The name of the ensemble

Frequency display:

The frequency block and 
frequency is displayed.

Time display

Automatic clock adjustment

To verify or improve the 
signal reception quality

SC-HC57DB~RQT9709-1B.book  Page 16  Friday, March 2, 2012  3:31 PM

Summary of Contents for SC-HC57DB





























Reviews: