19
RQT9709
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock (
>
18).
∫
Setting the timer
1
Press [SETUP] repeatedly to select
“TIMER ADJ” and then press [OK].
2
Press [
3
,
4
] to set the starting time
(“ON TIME”) and then press [OK].
3
Press [
3
,
4
] to set the finishing time
(“OFF TIME”) and then press [OK].
≥
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
≥
The music source and volume will also be displayed if the
timer is turned on. (
>
below)
∫
Turn the timer on
1
Select the music source*
1
and set the desired
volume.
2
Press [SETUP] repeatedly to select
“TIMER SET” and then press [OK].
3
Press [
3
,
4
] to select “SET” and then press [OK].
≥
“
F
” is displayed.
4
Press [
Í
] to turn the unit off.
*1: “CD”, “USB”, “IPOD”, “DAB/DAB+” and “FM” can be set as
the music source.
≥
This unit can be used as normal after the timer is set,
however:
≥
Turn the unit to standby mode before the timer start time.
≥
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
≥
To turn the timer off, select “OFF” in step 3.
≥
The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] repeatedly to select “SLEEP” and
then press [OK].
2
Press [
3
,
4
] to set the time (in minutes) and then
press [OK].
“SLEEP 30”
,.
“SLEEP 60”
,.
“SLEEP 90”
,.
“SLEEP 120”
^------------------------.
OFF (Cancel)
(------------------------J
≥
The remaining time is indicated on the unit’s display except
when other operations are performed.
≥
The play timer and sleep timer can be used together. The
sleep timer always has priority.
Others
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for 30 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select “AUTO OFF”
and then press [OK].
2
Press [
3
,
4
] to select “OFF” and then press [OK].
≥
To turn automatic standby on, select “ON” in step 2.
≥
This setting cannot be selected when “DAB/DAB+” or “FM” is
the source.
The brightness of this unit’s display can be changed.
1
Press [SETUP] repeatedly to select “DIMMER”
and then press [OK].
2
Press [
3
,
4
] to select “ON” and then press [OK].
To cancel the dimmer, select “OFF” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1
Press [CD] to select “CD”.
2
Press and hold [CD] on the main unit and [
3
] on
the remote control until the main unit’s display
shows “REMOTE 2”.
3
Press and hold [OK] and [
3
] on the remote control
for at least 4 seconds.
To change the mode back to “REMOTE 1”, repeat the steps
above by replacing [
3
] with [
4
].
Play timer
Sleep timer
Automatic standby
Display brightness
Changing the main unit and
remote control code
SC-HC57DB~RQT9709-1B.book Page 19 Friday, March 2, 2012 3:31 PM
