background image

2

TQBJ0987

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure 
that the replacement fuse has a rating of 5-ampere and 
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 

Ï

 or the BSI mark 

Ì

 on the 

body of the fuse.
If the plug contains a removable fuse cover you must 
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used 
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your 
local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of 
AC mains plug (figures A and B). Confirm the AC 
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse 

cover.

Safety precautions

Unit

To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or 

splashing.

– Do not place objects filled with liquids, such as vases, on 

this unit.

– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to 

qualified service personnel.

– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the 

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the 

plug.

– Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from 
the socket outlet immediately.

Unit

This unit utilizes a laser. Use of controls or adjustments or 
performance of procedures other than those specified herein 
may result in hazardous radiation exposure.

Do not place sources of naked flames, such as lighted 
candles, on this unit.

This unit may receive radio interference caused by mobile 
telephones during use. If such interference occurs, please 
increase separation between this unit and the mobile 
telephone.

This unit is intended for use in moderate climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in 

cabinet or in another confined space. Ensure this unit is 
well ventilated.

– Do not obstruct this unit’s ventilation openings with 

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high 

temperatures, high humidity, and excessive vibration.

Figure A

Figure B

Fuse cover

Figure A

Fuse
(5 ampere)

Figure B

Fuse
(5 ampere)

WARNING

CAUTION

SC-HC400_402-EGEBGN~TQBJ0987.book  2 ページ  2017年3月16日 木曜日 午後7時52分

Summary of Contents for SC-HC402





























Reviews: