13
TQBJ0987
Listening to FM/AM radio
You can preset up to 30 FM channels/15 AM channels.
Channel 1 to 5 will be set as the favourite stations
under (FAVOURITE)
[1] to [5]. (
l
right, “Changing the
stations stored under (FAVOURITE) [1] to [5]”)
Preparation
≥
Make sure that the antenna is connected. (
l
6)
≥
Turn the unit on.
≥
Press [RADIO, EXT-IN] repeatedly to select “FM” or
“AM”.
1
Press [RADIO MENU] to select “A.PRESET”.
2
Press [
2
,
1
] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(“FM 87.50”, “AM 520” or “AM 522”).
CURRENT:
To begin auto preset with the current frequency.*
1
≥
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to “Manual tuning”.
Press the numeric buttons, [
:
] or [
9
] to select
the preset station.
≥
Alternatively, press [
:
/
6
] or [
5
/
9
] on this unit
when “PRESET” is selected as the tune mode*
2
.
≥
You can select channel 1 to 5 by pressing one of
(FAVOURITE) [1] to [5] on this unit.
∫
Manual tuning
Press [
6
] or [
5
] to tune in to the station.
≥
Alternatively, press [
:
/
6
] or [
5
/
9
] on this unit
when “MANUAL” is selected as the tune mode*
2
.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
*2: To change the tune mode
1 Press [RADIO MENU] repeatedly to select “TUNE
MODE”.
2 Press [
2
,
1
] to select “MANUAL” or “PRESET”, and
then press [OK].
1
While listening to the radio broadcast
Press [PROGRAM].
2
Press the numeric buttons to select a preset
number.
≥
Do steps 1 through 2 again to preset more stations.
≥
A station previously stored is overwritten when another
station is stored in the same channel preset.
You can change the stations stored under
(FAVOURITE) [1] to [5] easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until “P
” appears on
the display.
(“
” stands for a number.)
≥
When you change the stations stored under (FAVOURITE)
[1] to [5], channel 1 to 5 are also changed to the same
corresponding stations.
∫
To display the current FM signal status
For Continental Europe:
Press [DISPLAY] repeatedly to select “FM STATUS”.
For others:
Press [DISPLAY].
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
∫
To display RDS text data
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
≥
RDS is available only when stereo works in reception.
≥
RDS may not be available if reception is poor.
AM radio is only available for
[HC400]
(Australia
and New Zealand only).
Presetting stations automatically
Listening to a preset channel
Presetting stations manually
Changing the stations stored under
(FAVOURITE) [1] to [5]
“FM ST”:
FM stereo broadcast is being received.
“FM - - - -”:
No broadcast is received or FM
broadcast received is weak or in
monaural.
“FM MONO”: You have set the “FM MODE” to
“MONO”. (
l
16, “If noise is excessive
during FM reception.”)
“PS”:
Programme service
“PTY”:
Programme type
“FREQ”: Frequency
SC-HC400_402-EGEBGN~TQBJ0987.book 13 ページ ２０１７年３月１６日 木曜日 午後７時５２分
