Panasonic SC-EN35P, Service Manual

Page: 18 / 73

8.3.2. XM Satellite Radio Code Table
Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
XM RADIO XM Radio Selection It takes a short time for
the XM radio to power up
after
selecting the
source on the main unit.
During this time, the FL
display
shows the
message. Wait for a few
seconds for the process
to complete, if not, check
on the XM antenna if it is
connected or damaged.
(Flashing)
ANTENNA XM connectivity The XM antenna is not
properly connected or
the antenna cable is
damaged.
(Flashing)
For more information, refer to operating
instruction manual for connection of
antenna.
UPDATING XM Encryption Code 1) The XM antenna is
being updated with the
latest encryption code.
(Wait for few seconds for
the
updating to be
completed.)
2) The selected XM
channel
has been
blocked, or is no longer
available
with the
subscription package.
(Flashing)
NO SIGNAL XM Signal receptivity The XM antenna is too
weak.
Re-oriented
the XM
antenna for better
reception.
(Flashing)
For more information, refer to operating
instruction manual for optimizing the
signal reception.
OFF AIR XM Channel
Broadcasting The selected XM
channel is not currently
broadcasting
information.
(Flashing)
For more information, refer to operating
instruction manual for selection of the
channels.
XM --- XM Channel
Broadcasting The selected XM
channel is not available.
Selection of a diffrent
channels.
(Flashing)
For more information, refer to operating
instruction manual for selection of the
channels.
XM ERROR XM Module
Abnormality The XM radio module is
performing
abnormally.
Turn the main unit off
and power on. The XM
antenna
may be
defective.
(Flashing)
Special Note: XM Satellite Radio ID is necessary for the activation of the XM Satellite Radio.
18
SC-EN35P / SC-EN35PC