5
RQT9252
Setup example
Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate.
§
Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf.
∫
Notes on speaker use
≥
Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
≥
Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
∫
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetizing function of the TV should correct the problem. If it
persists, move the speaker further away from the TV.
∫
Caution
≥
Do not touch the front netted area of the speakers. Hold by the
sides.
≥
Do not stand on the base. Be cautious when children are near.
Do not use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label
on the rear of the speaker.
To avoid interference, maintain the following distances between
the wireless system and other electronic devices that use the
same radio frequency (2.4 GHz band).
The wireless system will automatically seek a clear channel if any of these
other devices interfere with its communication. When this happens, the
wireless link indicator (“
[W2S]
” or “
[W4S]
”) flashes on the main unit, and there is
a brief interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater system.
If the interference persists, try moving the other devices to another location outside the range of the wireless system or move
the wireless system nearer to the main unit.
Enjoying 7.1ch surround sound
Optional Panasonic wireless accessory SH-FX67/Optional Panasonic speaker system SB-HS100A
You can enjoy 7.1ch surround sound when you use the optional Panasonic wireless system SH-FX67 and speaker system
SB-HS100A. Refer to the relevant operating instructions for details.
≥
You can also enjoy 7.1ch surround sound by connecting an amplifier using audio cable via the SURROUND and
SURROUND BACK terminals on the back of the main unit (
>
8).
≥
System speaker settings will need to be changed in order to enjoy 7.1ch surround sound (
>
37).
60º
120º
Subwoofer
Place to the right or
left of the TV, on the
floor or a sturdy shelf
so that it will not
cause vibration.
Leave about 30 cm
from the TV.
Front
speakers
Put on a rack or shelf. Vibration caused by
the speaker can disrupt the picture if it is
placed directly on the TV.
To allow for proper ventilation and to maintain
good airflow around the main unit, position it
with at least 5 cm of space on all sides.
Wireless system
§
Place the wireless system
within approximately 10 m from
the main unit.
Main unit
Digital transmitter
§
Surround
speakers
Center speaker
NOTE
Wireless
system
Wireless LAN:
approx. 2 m
Cordless phone
and other
electronic devices:
approx. 2 m
Do
Do not
e.g., Center speaker
Do not
e.g., Front speaker
G
et
ti
ng st
ar
ted
Quick Start Guide
SCBT105GN-RQT9252-L.book Page 5 Monday, May 26, 2008 4:13 PM
