4
RQT9252
STEP
1
Assembling the front/surround speakers
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
≥
For optional wall mount, refer to page 6.
STEP
2
Positioning
How you set up your speakers can affect the bass and the sound field.
Note the following points:
≥
Place speakers on flat secure bases.
≥
Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
[Note]
Keep your speakers at least 10 mm away from the system for proper
ventilation.
Speaker assembly options
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers and
2 Surround speakers
≥
2
stands
with a red or white speaker cable connector:
For front speakers
≥
2
stands
with a blue or grey speaker cable connector:
For surround speakers
4 Bases
16 screws
Tighten securely.
Slide into the groove.
Position the cable
between the ridges.
Tighten securely.
Press into the groove.
Insert the wire fully.
i
: White
j
: Blue
Push!
Leave about 90 mm
Speaker label
Do not use a front speaker as a
surround speaker or vice versa.
Verify the type of speaker with the
label on the rear of speaker.
Leave about 100 mm
You can remove and use the cable from the
stand. To reattach the cable, refer to page 6.
Push!
Tighten securely.
Press into the groove.
Thread the speaker cable through the base.
Attach the speaker.
Insert the wire fully.
i
: White
j
: Blue
Caution
≥
The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you
experience a sudden change in performance.
≥
Do not attempt to attach these speakers to walls using methods other than those described in this manual.
SCBT105GN-RQT9252-L.book Page 4 Tuesday, May 27, 2008 3:49 PM