11
RQT9252
Set up the radio
Presetting the radio stations automatically
Up to 30 stations can be set in each band, FM and AM.
1
Press [FM/AM] to select “FM” or “AM”.
2
Press [
6
,
5
] to select the lowest frequency
(FM: 87.50, AM: 522).
3
Press and hold [OK].
Release the button when “M” begins to flash.
The tuner starts to preset all the stations it can receive into the channels in ascending
order.
≥
“SET OK” is displayed when the stations are set, and the radio tunes to the last preset
station.
≥
“ERROR” is displayed when automatic presetting is unsuccessful. Preset the channels
manually.
Manual tuning
1
Press [FM/AM] to select “FM” or “AM”.
Main unit: Press [SELECTOR].
2
Press [
6
,
5
] to select the frequency.
Main unit: Press [
X
] or [
W
].
≥
When a radio broadcast is being received, “TUNED” lights in the
display.
≥
When a stereo broadcast is being received, “ST” lights in the
display.
To start automatic tuning, press and hold [
6
,
5
] until the frequency
starts scrolling. Tuning stops when a station is found.
Presetting stations manually
Up to 30 stations can be set in each band, FM and AM.
1
Press [FM/AM] to select “FM” or “AM”.
2
Press [
6
,
5
] to select the frequency.
3
Press [OK].
“P” and “M” begin to flash.
4
Press the numbered buttons to enter
preset channel number.
≥
To select a 1-digit number
e.g., “1”: [1]
>
[OK].
≥
To select a 2-digit number
e.g., “12”: [1]
>
[2].
≥
A station previously stored is overwritten when another station is stored in the same
channel preset.
Repeat steps
2
to
4
to set other stations.
Selecting the preset channels
1
Press [FM/AM] to select “FM” or “AM”.
2
Press the numbered buttons to select the
channel.
≥
To select a 1-digit number
e.g., “1”: [1]
>
[OK].
≥
To select a 2-digit number
e.g., “12”: [1]
>
[2].
Alternatively, press [
:
,
9
] or [
2
,
1
] to select the channel.
If noise is excessive
When “FM” is selected
Press [FM MODE] to display “MONO”.
≥
Press the button again to cancel the mode.
≥
The mode is also canceled when you
change the frequency.
≥
This setting can be preset for each broadcasting station. When
“MONO” appears follow procedures
3
and
4
in Presetting
stations manually (
>
above).
When “AM” is selected
Press [AM BP] to select “AM
BP1” or “AM BP2” that receives
good reception.
Each time you press the button:
AM BP1
(.
AM BP2 (BP=Beat Proof)
[
6
,
5
]
[
:
,
9
]
Numbered
buttons
[FM/AM]
[SELECTOR]
[
X
], [
W
]
[FM MODE]
[AM BP]
[OK]
[
2
,
1
]
M
D E
PL
TUNED
ST
TUNED
M
e.g., “12”
e.g., “12”
NOTE
MONO
TUNED
TUNED
e.g., “AM BP1” is selected.
G
et
ti
ng st
ar
ted
Quick Start Guide
SCBT105GN-RQT9252-L.book Page 11 Thursday, May 29, 2008 9:51 AM
