Panasonic Corporation
Web Site: http://panasonic.net
En
E
Sp
RQTX1295-M
L0211CH0
Radio
Manual tuning
1
Press [RADIO, EXT-IN] to select “FM” or “AM”.
2
Press [
3
] or [
5
] to select the frequency of the required
station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
“
” is shown when a stereo FM broadcast is being received.
Memory presetting
30 FM and 15 AM stations can be preset.
Preparation
Press [RADIO, EXT-IN] to select “FM” or “AM”.
Automatic presetting
1
Press [OK] to select “LOWEST” or “CURRENT” frequency.
2
Press [RADIO MENU] to select “A.PRESET” and then press
[OK].
“START?” is shown.
3
Press [OK] to start presetting.
Manual presetting
1
Press [
3
] or [
5
] to tune in to the station.
2
Press [PROGRAM].
3
Press the alphanumeric buttons to select a preset number.
The new station replaces any station that occupies the same
preset number.
4
Do steps 1 through 3 again to preset more stations.
Selecting a preset station
Press the alphanumeric buttons, [
2
] or [
6
] (main unit:
[
2
/
3
] or [
5
/
6
]) to select the preset station.
Play and record timers
You can set the timers to come on at a certain time to:
– Wake you up (play timer).
– Record from the radio or the external equipment (record timer).
Play timer and record timer cannot be used together.
Switch on the system and set the clock.
Play timer
Prepare the music source you want to listen to (disc,
USB, internal memory, radio or external equipment)
and set the volume.
Record
timer
Connect the USB mass storage device (for USB
recording) and tune to the radio station or select the
external equipment.
1
Press [CLOCK/TIMER] to select the timer.
CLOCK
#
PLAY
#
REC
Original display
#
PLAY : to set the play timer
#
REC : to set the record timer
2
Within 10 seconds, press [
R
,
T
] to set the start time.
3
Press [OK].
4
Do steps 2 and 3 again to set the end time.
5
Press [
R
,
T
] to select the source you want to play or
record.
6
Press [OK].
For play timer proceed to step 9.
For record timer continue from step 7.
7
Press [
R
,
T
] to select “USB” or “MEMORY” to keep the
recording.
8
Press [OK].
To start the timer
9
Press [
#
, PLAY/REC] to start the timer.
10
Press [
`
] to switch off the system.
The system must be switched off for the timer to operate.
Change the
settings
Do steps 1 through 8 and 10 again (
Z
above).
Change the
volume
1) Press [
#
, PLAY/REC] to remove the timer
indicator on the display panel.
2) Change the volume.
3) Do steps 9 and 10.
Check the
settings
Press [CLOCK/TIMER] to select “
#
PLAY” or
“
#
REC”.
Cancel
Press [
#
, PLAY/REC] to remove the timer indicator
on the display panel.
Note:
• The play timer starts at a low volume and increases gradually to the
preset level.
• The record timer starts 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• If you switch off the system and switch on again while a timer is in
operation, the timer will not stop at the end time.
Clock and timers
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Within 10 seconds, press [
R
,
T
] to set the time.
3
Press [OK].
Press [CLOCK/TIMER] to show the clock for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
SC-AKX72_PN_le_en.indd 24
SC-AKX72_PN_le_en.indd 24
1/27/2011 11:48:27 AM
1/27/2011 11:48:27 AM
