Panasonic SC-AK62 Operating Instructions Manual Download Page 35

Page: 35 / 40

RQT5769

Timer and others

AUX 1/2

DISPLAY/
DEMO

SC-AK77

AUX

SC-AK66

SC-AK62

Headphones
(not included)

Using an external unit

Listening to an external source

(See page 8 for external unit connection)

SC-AK77

Press [AUX 1/2] or [6CH INPUT].

SC-AK66

SC-AK62

Press [AUX] or [6CH INPUT].
The system will come on automatically.

Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)

Recording from an external source

SC-AK77

Press [AUX 1/2].

SC-AK66

SC-AK62

Press [AUX].

Press [

REC/STOP] (recording starts).

Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)

You cannot record when [6CH INPUT] is selected.

Listening with headphones

Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm (

˝) stereo

Note

Avoid listening for prolonged periods of time to prevent hearing damage.

Convenient functions

Switching displays

Press [-DISPLAY/–DEMO] to select the desired spectrum
analyzer.

Every time you press the button:

Normal

Peak hold

Aurora

Off (Dimmer)

When the spectrum analyzer is off, the display is dimmed and indicators,
except for the AC supply indicator, are turned off for better television
viewing.

To mute the volume

by remote control only

This feature is convenient when you have a telephone call, etc.

Press [MUTING].

Press the button again to cancel.
“MUTING” goes out.
Muting can also be canceled by lowering the volume all the
way (--dB).

When the system is turned off, the muting operation will be automatically
canceled.

33-35 AK77/66/62 [P/PC]

13/7/01, 2:44 pm

Summary of Contents for SC-AK62









































Search results

Summary of Contents for SC-AK62

Reviews:

Related manuals for SC-AK62

Brands by name

Popular brands

Panasonic SC-AK62, Operating Instructions Manual

Search results

Summary of Contents for SC-AK62

Reviews:

Related manuals for SC-AK62

Brands by name

Popular brands