Panasonic SC-AK62 Operating Instructions Manual Download Page 28

Page: 28 / 40

Sound quality/sound field operations

RQT5769

SUPER 3D AI

100Hz

10kHz

1kHz

100Hz

10kHz

1kHz

100Hz

10kHz

1kHz

LIGHT

HEAVY

SOFT

LIGHT

HEAVY

SOFT

LIGHT

HEAVY

SOFT

Varying the sound quality with the

manual equalizer

only

Dial [SOUND EQ] to display “MANUAL”.

When it is turned clockwise, the settings are selected in the
following sequence.

HEAVY

CLEAR

SOFT

DISCO

LIVE

HALL

MANUAL

AI-EQ

FLAT

Adjust the sound quality.

← →

direction:

For selecting the range of the sound to
be adjusted

Characteristics of each sound range

Under 100 Hz:

Super woofer range

Around 330 Hz:

Bass to midrange

Around 1 kHz:

Midrange

Around 3.3 kHz:

Midrange to treble

Above 10 kHz:

Treble

↓ ↑

direction:

For adjusting the level (7 steps)

When the level is in the center, the dot flashes rapidly.
Repeat steps

and

to set the desired sound quality.

The original display is restored on the display panel in about 5
seconds.

To release the equalizer

Dial [SOUND EQ] to display “FLAT”.

Notes

•

The sound quality setting is stored automatically. It is recalled when
“MANUAL” is next selected.

•

All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.

Varying the sound quality with the

acoustic image (Al) equalizer

only

The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
quality coordinates to achieve subtle sound quality settings with ease.

Press [SUPER 3D AI] on the main unit to adjust the
surround level.

Press [3D AI] on the remote control to adjust the
surround level.

Every time you press the button:

3D AI 1

3D AI 2

AI-EQ

Adjust the sound quality.

← →

direction:

SOFT–SHARP setting

↓ ↑

direction:

LIGHT–HEAVY setting

Repeat steps

and

to set the desired sound quality.

The original display is restored on the display panel in about 5
seconds.

To release the equalizer

Dial [SOUND EQ] to display “FLAT”.

Notes

•

The sound quality setting is stored automatically. It is recalled when
“Al-EQ” is next selected.

•

All recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.

•

“3D AI 1” and “3D AI 2” cannot be selected while a surround system
is on.

SC-AK77

27-28 AK77/66/62 [P/PC]

13/7/01, 2:46 pm

Summary of Contents for SC-AK62









































Search results

Summary of Contents for SC-AK62

Reviews:

Related manuals for SC-AK62

Brands by name

Popular brands

Panasonic SC-AK62, Operating Instructions Manual

Search results

Summary of Contents for SC-AK62

Reviews:

Related manuals for SC-AK62

Brands by name

Popular brands