Panasonic SC-AK62, Operating Instructions Manual

Page: 34 / 40

34
Timer and others
RQT5769
Using the play/record timer
To change the timer
Press [ r PLAY/ r REC] to select the desired timer.
Every time the button is pressed the setting changes as follows.
To check settings
While the unit is on and the “ r PLAY” (or “ r REC”) indicator is on,
press [CLOCK/TIMER] so “ r PLAY” (or “ r REC”) appears on the
display.
Two seconds after “
r PLAY” (or “ r REC”) appear, the settings are
displayed in the following order:
•
For play timer
•
For record timer
1
Play start time
1
Recording start time
2
Play finish time
2
Recording finish time
3
Play source
3
Recording source
4
Playback volume
You can check the settings even when the system is OFF by pressing
[CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is completed
The volume level (for play timer) and music source are stored in the
timer memory and the timer will start in these preset conditions.
However, the Disc numbers and reverse mode (for SC-AK77) do not
get stored in the timer memory.
1. After step
4
, start playing the desired source.
2. Reset the Disc numbers and reverse mode (for SC-AK77) if you
have changed any of them, confirm that a Disc or cassette is
inserted, then press [
f / 7 , POWER] to put the unit on standby.
Notes
•
If you switch the system to the standby mode while the play/record
timer is functioning, the OFF time setting will not be activated.
•
If “AUX 1/2” (SC-AK66 and SC-AK62: “AUX”) or “ 6CH INPUT” is
selected as the source, when the timer comes ON, the system will
turn ON and will engage “AUX 1/2” (SC-AK66 and SC-AK62: “AUX”)
or “ 6CH INPUT” as the source. If you want to playback or record
from a connected component, set the component’s timer to the
same time. (See the instruction manual that came with the
component.)
REC PLAY
(OFF) (OFF)
PLAY/
REC
Using the sleep timer
This timer turns your system OFF at the set time (Max. 2 hours,
settable at 30-minute intervals). It lets you fall asleep listening to
music.
Preparation
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90 SLEEP 120 SLEEP 60 SLEEP 30 SLEEP OFF
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Notes
•
The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
•
The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
Using the timer
by remote control only
33-35 AK77/66/62 [P/PC] 13/7/01, 2:44 pm 34