En
RQT6850-B
H1202TA0
Specifications
(DIN 45 500)
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
■
AMPLIFIER SECTION
Power output
(at 230 V for continental Europe)
(at 240 V for the United Kingdom, Australia and
New Zealand)
(at 127 V for other areas)
DIN 1 kHz (T.H.D. 1 %)
2 x 80 W (6
Ω
)
40 Hz–20 kHz continuous power output both channels driven
2 x 60 W (6
Ω
)
Total harmonic distortion
rated power at 40 Hz–20 kHz
0.9 % (6
Ω
)
half power at 1 kHz
0.07 % (6
Ω
)
Power output at 1 kHz each channel driven
DIN 1 kHz (T.H.D. 1 %)
Front
2 x 80 W (6
Ω
)
Center
80 W (6
Ω
)
Surround
2 x 80 W (6
Ω
)
Power bandwidth both channels driven, –3 dB
10 Hz –40 kHz (6
Ω
)
Damping factor
30 (6
Ω
)
Load impedance
Front
6–16
Ω
Center
6–16
Ω
Surround
6–16
Ω
Frequency response
CD, TAPE, DVD, TV, VCR 1, VCR 2
10 Hz–40 kHz, ±3 dB
Input sensitivity and impedance
CD, TAPE, DVD, TV, VCR 1, VCR 2
200 mV/22 k
Ω
S/N at rated power (6
Ω
)
CD, TAPE, DVD, TV, VCR 1, VCR 2
75 dB (IHF, A: 85 dB)
Tone controls
BASS
50 Hz, +10 to –10 dB
TREBLE
20 kHz, +10 to –10 dB
Output voltage
TAPE REC (OUT), VCR OUT
200 mV
Channel balance (250 Hz–6.3 kHz)
±1 dB
Channel separation
55 dB
Headphones output level and impedance
430 mV/330
Ω
Subwoofer frequency response (–6 dB)
7–200 Hz
■
FM TUNER SECTION
Frequency range
87.50–108.00 MHz
Sensitivity
S/N 30 dB
1.5 µV/75
Ω
S/N 26 dB
1.3 µV/75
Ω
S/N 20 dB
1.2 µV/75
Ω
IHF usable sensitivity (IHF’58)
1.5 µV/75
Ω
IHF 46 dB stereo quieting sensitivity
22 µV/75
Ω
Total harmonic distortion
MONO
0.2 %
STEREO
0.3 %
S/N
MONO
60 dB (73 dB, IHF)
STEREO
58 dB (67 dB, IHF)
Frequency response
20 Hz–15 kHz
+1 dB, –2 dB
Alternate channel selectivity
±400 kHz
65 dB
Capture ratio
1.5 dB
Image rejection at 98 MHz
40 dB
IF rejection at 98 MHz
70 dB
Spurious response rejection at 98 MHz
70 dB
AM suppression
50 dB
Stereo separation
1 kHz
40 dB
Carrier leak
19 kHz
–30 dB (–35 dB, IHF)
38 kHz
–50 dB (–55 dB, IHF)
Channel balance (250 Hz–6.3 kHz)
±1.5 dB
Limiting point
1.2 µV
Bandwidth
IF amplifier
180 kHz
FM demodulator
1000 kHz
Antenna terminal
75
Ω
(unbalanced)
■
AM TUNER SECTION
Frequency range
522–1611 kHz (9 kHz steps)
530–1620 kHz (10 kHz steps)
Sensitivity
20 µV, 330 µV/m
Selectivity (at 999 kHz)
55 dB
IF rejection (at 999 kHz)
50 dB
■
VIDEO SECTION
Output voltage at 1 V input (unbalanced)
1±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75
Ω
(unbalanced)
■
GENERAL
Power supply
For continental Europe
AC 230 V, 50 Hz
For the United Kingdom, Australia and New Zealand
AC 230–240 V, 50 Hz
For other areas
AC 110–127 V, 220–240 V, 50/60 Hz
Power consumption
220 W
Dimensions (W x H x D)
430 x 158 x 390 mm
Mass
8.5 k
g
Power consumption in standby mode:
2 W
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Note
Digital input
Optical
2
Coaxial
1
