85
Caution: Ensure pins of the regulator diode (D5803) are
properly seated and soldered on SMPS P.C.B..
9.31. Disassembly of AC Inlet P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
Step 1 Remove 2 screws at AC Inlet P.C.B..
Step 2 Cut 2 tie wraps.
Step 3 Remove 1 screw at the rear panel.
Step 4 Detach the rear panel slightly backward as arrow
shown.
Step 5 Lift up the AC Inlet P.C.B..
Step 6 Flip over the AC Inlet P.C.B. and desolder 2 wires pins
(red and black).
Caution: During assembling, ensure the P.C.B. is seated
properly at the locators.
Caution: Remember to use tie wraps to tie red & black
wires between AC Inlet P.C.B. to the chassis.
Summary of Contents for SA-VK880EE-K
