Panasonic SA-VK31GC Service Manual Download

Page: 12 / 116

Step 1

Remove 3 screws each side and 5 screws at rear panel.

Step 2

Lift up both sides of cabinet ass’y, push the cabinet

ass’y toward the rear and remove the cabinet ass’y.

Disassembly of Rear Panel

Step 3

Remove 8 screws and disconnect wire at CN305 (Fan)

at rear cabinet as shown.

11.1.1. Disasembly for CD Lid

(The CD changer unit can be removed after the CD Lid is
removed)

Follow the (Step 1) - (Step 2) of Item 11.1 - Disassembly of
Top Cabinet and Rear Panel

When opening the disc tray automatically (Using Power
Supply)

Step 1

Connect the AC power cord.

Step 2

Press the POWER button to power up the main unit.

Step 3

Press the OPEN/CLOSE button, the disc tray will be

open automatically.

11.1. Disassembly of Top Cabinet and Rear Panel

SA-VK31GC / SA-VK31GS

All manuals and user guides at all-guides.com

Summary of Contents for SA-VK31GC





















































































































Search results

Summary of Contents for SA-VK31GC

Reviews:

Related manuals for SA-VK31GC

Brands by name

Popular brands

Panasonic SA-VK31GC, Service Manual

Search results

Summary of Contents for SA-VK31GC

Reviews:

Related manuals for SA-VK31GC

Brands by name

Popular brands