Panasonic SA-VK31GC Service Manual Download

Page: 26 / 116

Step 8

Release the 2 claws, and then remove the relay gear A.

Step 9

Release the 2 claws, and then remove the spindle shaft.

Step 10

Remove the lower spindle spring with tweezers.

Step 11

Force the lower hook with thin tip of minus screwdriver.

Step 12

Squeeze the shaft of lower hook, and then draw it.

Step 13

Rotate the lower spindle in the direction of arrow until

the lower spindle interferes with stopper.

Step 14

Insert the thin tip of minus screwdriver between the

lower spindle and UP/DOWN base, and then slacken the lower
spindle to release the stopper. Then, rotate the lower spindle
and remove it.

Step 15

Rotate the UP/DOWN base at a 90° angle. Then,

SA-VK31GC / SA-VK31GS

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for SA-VK31GC





















































































































Search results

Summary of Contents for SA-VK31GC

Reviews:

Related manuals for SA-VK31GC

Brands by name

Popular brands

Panasonic SA-VK31GC, Service Manual

Search results

Summary of Contents for SA-VK31GC

Reviews:

Related manuals for SA-VK31GC

Brands by name

Popular brands