10.3.2. DVD Module Error Code Table
Error
Code
U702 HDMI/DVI I2C
The communication error of I2C
Press [ STOP] on
communication error when connecting it with HDMI/
main unit for next error.
DVI. For instance, when EDID
information to which information on the
TV set side has been described
cannot be read, it is generated.
U703 HDMI/DVI attestation When attestation (HDCP) with the TV
Press [ STOP] on
error
side fails when connecting it with
main unit for next error.
HDMI/DVI, it is generated.
U704 HDMI/DVI SRM
It is generated at the equipment to
Press [ STOP] on
Riborcerar
which the TV set is Riborced when
main unit for next error.
connecting it with HDMI/DVI.
U705 HDMI/DVI SRM disk
It is generated at the time of it is time
Press [ STOP] on
falsification check
when illegal the SRM data of the
main unit for next error.
error
reproducing disk (verify error), when
connecting it with HDMI/DVI.
F740 HDMI device key
I2C error when writing HDMI Key
Press [ STOP] on
device into transmitter.
main unit for next error.
F893 FLASH ROM IC data Firmware error, DV5 LSI IC (IC8651)
Press [ STOP] on
falsification error
error.
main unit for next error.
F894 EEPROM IC
When failing in the access to
Press [ STOP] on
abnormality error
EEPROM IC located in the DVD
main unit for next error.
(HDMI) Module P.C.B. (IC8611)
F895 Language area
Firmware version agreement check for
Press [ STOP] on
abnormal
factory preset setting failure
main unit for next error.
prevention.
F896 No existence model
Firmware version agreement check for
Press [ STOP] on
factory preset setting failure
main unit for next error.
prevention.
F897 Initialization
Incomplete initialization after writing of
Press [ STOP] on
error
new firmware (Factory preset setting
main unit for next error.
failure prevention)
F898 Disagreement of
Unsuitable combination of AV Decoder,
Press [ STOP] on
hardware and
SDRAM & FLASH ROM IC (firmware).
main unit for next error.
software
F899 The communication
Unsuitable combination of number of
Press [ STOP] on
specification
system com and panel com used.
main unit for next error.
disagreement
(Frimware)
between
micro-processor
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
59
SA-PTX7P
Summary of Contents for SA-PTX7
