10.2. Checking of Main P.C.B. (Side
B)
Step 1 Remove Top Cabinet.
Step 2 Remove CD Mechanism Unit.
Step 3 Attach 24P FFC at the connector (FP8202) on Main
P.C.B..
Step 4 Attach 10P FFC at the connector (FP8252) on Main
P.C.B..
Step 5 Side B Main P.C.B. can be checked as diagram shown.
10.3. Checking of Main P.C.B. (Side
A)
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove CD Mechanism Unit.
Step 5 Remove SMPS P.C.B..
Step 6 Remove Main P.C.B..
Step 7 Attach 10P FFC at the connector (FP8252) on Main
P.C.B..
Step 8 Attach 24P FFC at the connector (FP8202) on Main
P.C.B..
Step 9 Attach 2P Wire at the connector (CN2006) on Main
P.C.B..
Step 10 Attach 11P Cable at the connector (CN1851) on SMPS
P.C.B..
Step 11 Attach 12P Wire at the connector (CN5001) on Main
P.C.B..
Step 12 Flip the SMPS P.C.B..
Step 13 Positioned the CD Mechanism Unit as diagram shown.
Summary of Contents for SA-MAX750LMK
