9.5.
Disassembly of Front Panel
Unit
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 1 screw.
Step 2 Remove the Wire Clamper.
Step 3 Detach 10P FFC at the connector (CN2002) on Main
P.C.B..
Step 4 Detach 11P Cable at the connector (CN2001) on Main
P.C.B..
Step 5 Detach 30P FFC at the connector (CN2004) on Main
P.C.B..
Step 6 Detach 10P FFC at the connector (FP3002) on Main
P.C.B..
Step 7 Detach 5P Wire at the connector (FP3001) on Main
P.C.B..
Step 8 Remove 1 screw.
Step 9 Release tabs at the bottom of the unit.
Step 10 Detach to remove the Front Panel Unit
Summary of Contents for SA-MAX750LMK
