Player buttons
Remote control unit
buttons
Application
Note
STOP
0
Error code display
(Refer to
“14.3.
DVD
Diagnostic
Function
Code
”).
5
Tilt adjustment
Refer to
“17.4. Optical
adjustment”).
6
Area number and broadcasting system check
7
Built-in program version check
DISPLAY
DVD laser drive current check
Refer to
“14.1.
Optical
Pickup
Breakdown
Diagnosis
3
CD laser drive current check
PAUSE
Writing of laser drive current value after
replacement of optical pickup (Do use this
function only when optical pickup is replaced.)
Initialization of the player (factory setting is
restored.)
Used after replacement of micro-computer and
its peripherals and printed circuit board.
14.3. DVD Self Diagnostic Function-Error Code
Error
Code
Error Content
Additional error explanation
U, H error
U11
Focus error
H01
Tray loading error
H02
Spindle servo error
(Spindle servo, DSC (IC8271) SP motor, CLV servo error)
H03
Traverse servo error
(Traverse motor, IC8251)
H04
Tracking servo error
H05
Seek error
H06
Power error
Cannot switch off the power because of the panel and system
computer communication error
H07
Spindle motor drive error
Spindle motor
DSC related
F500
DSC error
DSC (IC8271) stops in the occurrence of servo error (startup,
error, etc.)
F501
DSC not Ready error
DSC-system computer communication error (Communication
caused by idling of DSC)
F502
DSC Time out error
Similar disposal as F500
F503
DSC communication Failure Communication error (result error occurred although
communication command was sent)
44
PDF created with pdfFactory Pro trial version
