RQTV0259
20
21
20
21
Other settings/Remote control operation guide
Other settings
INPUT SELECTOR
TUNE
MENU
RETURN
SETUP
SETUP MIC
VOLUME
ENTER
AUTO
SPEAKER SETUP
TUNE
MENU
RETURN
SETUP
ENTER
Setting descriptions
INPUT MODE (Input mode)
This unit automatically detects whether input is digital or
analogue, but you can fix the input mode.
AUTO: The unit automatically detects whether input is digital
or analogue.
ANALOG: Select to make the unit accept analogue input.
DIG: Select to make the unit accept digital input.
PCMFIX
1
: Select to input to PCM.
A
DRCOMP (Dynamic range compression)
Change this setting to listen to software recorded with Dolby
Digital at low volume (such as late at night) and maintain
audio clarity. It reduces the peak level in loud scenes without
affecting the sound field.
OFF: The software is played with the original dynamic range
(factory setting).
STANDARD: The level recommended by the producer of the
software for household viewing.
MAX: The maximum allowable compression (recommended
for night viewing).
B
ATTENUATOR (A/D Attenuator)
Turn the A/D attenuator on if “OVERFLOW” lights frequently
when using 2-channel analogue input.
C
Changing the settings
1. Press and hold [
―
SETUP] to enter the setup menu.
2. Press [TUNE - or +] to select the item you want to
change
➡
[ENTER].
3. Change the settings.
INPUT MODE
1. Press [TUNE - or +] to select “TV”, “DVR” or “DVD”
➡
[ENTER].
2. Press [TUNE - or +] to change the setting.
The display changes as follows:
AUTO
↔
ANALOG
↔
DIG
↔
PCMFIX
DRCOMP
Press [TUNE - or +] to select “OFF”, “STANDARD” or “MAX”.
ATTENUATOR
Press [TUNE - or +] to select “OFF” or “ON”.
TV DELAY
Press [TUNE - or +] to select “OFF” or “ON”.
4. Press [RETURN] repeatedly until “EXIT” appears
➡
[ENTER].
A
B
C
D
1
In rare cases, the unit may have trouble recognizing PCM
signals and this may cause the beginnings of tracks to be
cut off. Select “PCMFIX” if this occurs.
With DTS, the signals may not be recognized at all. Engage
the DTSFIX mode if this occurs.
To engage the DTSFIX mode:
Press and hold [-MENU] and [ENTER] at the same time.
“DTS” lights.
To cancel the DTSFIX mode:
Press and hold [-MENU] and [ENTER] at the same time.
The mode cancels when input mode is set to AUTO or
when the unit is turned off.
When a FIX mode is on, the unit cannot process other
signals. This may cause noise to be output. If this occurs,
select an input mode other than PCMFIX, or cancel the
DTSFIX mode.
•
Note
21
20
Remote control operation guide
This remote control can operate Panasonic DVD recorders, DVD players, and televisions.
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations.
Before using a Panasonic DVD recorder or player
DVD recorder
Change the remote control code to match the remote control mode of the DVD recorder.
1. Check the remote control mode of the DVD recorder.
2. For about one second hold down both [OK] and the numbered button ([1], [2] or [3]) (the same as the remote control mode of the
DVD recorder).
The factory setting is [1].
DVD player
Change the remote control code so you can operate a DVD player.
For about one second hold down both [OK] and [4].
TV DELAY
Delay audio if there appears to be a difference in timing
between audio and pictures.
D
SA-HR50 (RQTV0259-E).indb 20
8/24/2007 10:11:03 AM
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.
