VQT4J81
56
56
Setting Item
Details
SETTING
OFF
: Timer does not operate.
ON
: Timer operates.
REPEAT
ONCE
: Recording or playback is
performed just once.
DAILY
: Recording or playback is
performed daily.
SELECT
: Recording or playback is
performed every week on the selected
day.
1
Press +, – to select the day and use
[
q
OK] to add a check mark. (Press
[
q
OK] again to clear the selection.)
2
When the day is selected, select “OK”
and press [
q
OK].
TIME
1
Set the start time and end time
Select the item (select the start hour,
minutes, end hour, minutes) using
u
,
i
and set using +, –.
• Up to 12 hours can be set for the period
from start time until end time.
REC/PLAY
PLAY
: Plays a set file, or plays the alarm
sound.
REC
: Records the set sound source.
Setting Item
Details
PLAY
2
ALARM
: Plays the alarm sound.
FILE
: Plays a file.
The file list of the folder being selected is
displayed.
Press +, – to select the file and press
[
q
OK]. When selecting files by switching
folders, press
u
and you can move
within hierarchies. (For details of file and
folder selection methods, see page 13.)
SOURCE
3
MIC
: Microphone recording.
LINE
: Records sound from an external
device.
MODE
3
PCM 44.1kHz, MP3 320kbps,
MP3 192kbps, MP3 128kbps,
MP3 64kbps, MP3 32kbps
REC TO
3
Select the folder in which to save the
recorded file.
• If an SD card folder is selected, insert
the SD card.
1
When setting the start time and end time, do not mix
up a.m. and p.m.
AM12:00 and PM12:00 represent 0:00 a.m. and noon
respectively. When performing timer recording at 0:00
a.m., set the start time to “AM12:00”.
2
Displayed when “PLAY” is selected for “REC/PLAY”.
3
Displayed when “REC” is selected for “REC/PLAY”.
Using the timer
VQT4J81̲RR-XS450̲420-E̲En.indd 56
VQT4J81̲RR-XS450̲420-E̲En.indd 56
2012/05/29 9:35:48
2012/05/29 9:35:48