Panasonic PVDF2035 - DVD/VCR TV COMBO Operating Instructions Manual Download

Page: 11 / 64

Getting Started

Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and

speakers. There are two types of connection, digital and analog.

Connect an AV amplifier with Dolby Digital or DTS

decoders

Digital connection

Connecting the Audio Output Terminal

Please see amplifier manual
for speaker requirements.

Speakers (example)

Amplifier with built in Dolby Digital
or DTS decoders.

Firmly connect the

cable to the connector.

OPTICAL

Connect a Digital amplifier

Enjoy “Dolby Digital” or “DTS” surround sound.

Smart one-line connection is possible.

Don’t place the unit on amplifier or

equipment that may become hot.

The heat can damage the unit.

WARNING

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

































































Search results

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

Reviews:

Related manuals for PVDF2035 - DVD/VCR TV COMBO

Brands by name

Popular brands

Panasonic PVDF2035 - DVD/VCR TV COMBO, Operating Instructions Manual

Search results

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

Reviews:

Related manuals for PVDF2035 - DVD/VCR TV COMBO

Brands by name

Popular brands