background image

2

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

On your purchase of one of the most sophisticated and reliable 

products on the market today. Used properly, it will bring you and 

your family years of enjoyment. Please fill in the information below. 

The serial number is on the tag located on the back of your unit.

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for 

replacement parts.

Date of Purchase  _____________________

Dealer Purchased From ________________

Dealer Address _______________________

Dealer Phone No. _____________________

Model No.   __________________________

Serial No.  ___________________________

1 Remote Control 

(EUR7724020 or

 EUR7724020R)

2 Batteries “AA”

Congratulations

 Accessories

The unit may tip or fall if not situated on a stable surface, if 

pushed, or during an earthquake. Use a strong rope or chain 

(not included) to fasten the unit firmly to a strong wall support.

 Safety Precaution

Be sure to read the following cautions carefully.

Never pick unit up by VCR cassette opening.

 

PV-DF2735 only

To order accessories, call toll free 

1-800-332-5368.

Before Using

This television receiver provides display of television closed 

captioning.

U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 

5,315,448; and 6,516,132.

This product incorporates copyright protection technology that is 

protected by U.S. patents and other intellectual property rights. 

Use of this copyright protection technology must be authorized 

by Macrovision, and is intended for home and other limited 

viewing uses only unless otherwise authorized by Macrovision. 

Reverse engineering or disassembly is prohibited.

WARNING

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

































































Reviews: