Panasonic PVDF2035 - DVD/VCR TV COMBO Operating Instructions Manual Download

Page: 30 / 64

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Insert pre- recorded tape.

Insert blank tape with record tab.

• Dubbing tapes protected with Copy Guard will

have poor quality results.

Press PLAY,

then

press PAUSE

starting point to put in Standby mode.

Press PLAY

to start dubbing.

Playing Source unit starts playback.

Press STOP

to stop dubbing.

Select “LINE” mode.

See page 16 “Selecting Input Mode”.

Press REC,

then

press STILL/PAUSE

immediately to put in

Standby mode.

Press STILL/PAUSE

to start dubbing.

Editing unit starts recording.

Press STOP

to stop dubbing.

Refer to page 10 “Connecting the “1, 2” Input Terminal” before you perform this operation.

(Perform operation of steps 3 and 4 on both units at same time.)

Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

Playback (Source) unit

Recording (Editing) unit

IMPORTANT

Note:

• Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/CD/Video CD to VHS tape using this unit.

Copy Your Tapes (Dub bing)

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

































































Search results

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

Reviews:

Related manuals for PVDF2035 - DVD/VCR TV COMBO

Brands by name

Popular brands

Panasonic PVDF2035 - DVD/VCR TV COMBO, Operating Instructions Manual

Search results

Summary of Contents for PVDF2035 - DVD/VCR TV COMBO

Reviews:

Related manuals for PVDF2035 - DVD/VCR TV COMBO

Brands by name

Popular brands