"BRIGHTNESS".
4. Press the VOL. UP/DOWN button on the remote control until the
screen begin to shine.
5. Receive the black pattern*. (Audio Video Input)
6. Press the INPUT button on the remote control to set to the AV
mode. Then perform the above adjustments 2~4.
*The Black Pattern means the whole black raster signal.Select the
"RASTER" of the pattern generator, set to the OFF position for
each R, G and B.
13.2.9. SUB TINT
1. Receive the color bar pattern. (RF Input)
2. Connect the oscilloscope to TP803.
3. Using the remote control, set the brightness, contranst, color and
tint to normal position.
4. Activate the adjustment mode display of
Fig. 1-1
and press the
channel button (16) on the remote control to select "TINT".
5. Press the VOL. UP/DOWN button on the remote control until the
section "A" becomes a straight line. (Refer to
Fig. 2-2
.)
6. Receive the color bar pattern. (Audio Video Input)
7. Press the INPUT button on the remote control to set to the AV
mode. Then perform the above adjustments 2~5.
Fig. 2-2
13.2.10. SUB COLOR
1. Receive the color bar pattern. (RF Input)
2. Connect the oscilloscope to TP801.
49
