Note:
1. After replacing the DVD Unit, press ADD/DLT button on remote in
this mode. Only Total elapsed time "DVD Play" time (in hours) will
be cleared to 0.
2. To release from Usage Screen Mode, press any operation button
or insert a cassette tape in this mode. The unit will return to
normal operation mode.
5.1.5. GROUNDING FOR ELECTROSTATIC BREAKDOWN
Prevention
1. Human body grounding
Use the antistatic wrist strap to discharge the static electricity
from your body.
2. Work table grounding
Put a conductive material (sheet) or steel sheet on the area where
the optical pickup is placed and ground the sheet.
Caution:
The static electricity of your clothes will not be grounded through
the wrist strap. So take care not to let your clothes touch the
optical pickup.
Fig. 4
5.1.6. DVD DECODER C.B.A. REPLACEMENT NOTE
After replacing DVD Decoder C.B.A. or EEPROM IC (IC8001), confirm the Firmware version of
DVD using Self-Diagnostic function. If the version is different than that indicated on the
Firmware Disc, update it using the Firmware Disc. Refer to "
HOW TO UPDATE THE FIRMWARE
OF DVD
."
5.1.7. METHOD FOR EJECTING THE DVD TRAY MANUALLY
Summary of Contents for PV 20DF62
