background image

E

NGLISH

-19

Getting

s

tar

ted

18-E

NGLISH

Connections

Notes on connections

B

Read the instruction manual for each peripheral device carefully before
connecting it.

B

Turn off the power supply for all peripheral devices before making any
connections.

B

If the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.

B

If there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).

B

Refer to the list on page 58 for details on compatible signals which can be
input to the projector.

B

Only one audio system circuit is available for the AUDIO IN L-R jacks, so if
you change the audio input source, you will need to remove and insert the
appropriate plugs.

Projector position

H1

L

L

SH

SW

63.5  (2-1/2)

L:

Projection distance

SH: Image height
SW: Image width
H1: Distance from center

of lens to bottom edge
of projected image

Top edge of screen

Screen

Bottom edge of screen

Screen

NOTE:

B

The dimensions in the table above are approximate.

B

If you use the projection distance for the 16:9 screen,
the 4:3 projection image overflows the screen at the top
and bottom.

B

For details about projected image distances, refer to
page 59.

<Units: mm (inch)>

Projection distances

0.84 m(33˝)

0.50 m(1´7˝)

0.67 m(2´2˝)

1.2 m(3´11˝) 0.07 m(2-3/4˝)

1.01 m(40˝)

0.61 m(2´)

0.81 m(2´8˝)

1.2 m(3´11˝)

1.4 m(4´7˝)

0.09 m(3-17/32˝)

1.27 m(50˝)

0.76 m(2´6˝)

1.02 m(3´4˝)

1.5 m(4´11˝)

1.8 m(5´10˝) 0.11 m(4-5/16˝)

1.52 m(60˝)

0.91 m(3´)

1.22 m(4´)

1.9 m(6´2˝)

2.1 m(6´10˝) 0.13 m(5-3/32˝)

1.77 m(70˝)

1.07 m(3´6˝)

1.42 m(4´8˝)

2.2 m(7´2˝)

2.5 m(8´2˝)

0.15 m(5-7/8˝)

2.03 m(80˝)

1.22 m(4´)

1.63 m(5´4˝)

2.5 m(8´2˝)

2.9 m(9´6˝)

0.17 m(6-11/16˝)

2.28 m(90˝)

1.37 m(4´6˝)

1.83 m(6´)

2.8 m(9´2˝)

3.2 m(10´5˝) 0.20 m(7-27/32˝)

2.54 m(100˝) 1.52 m(5´)

2.03 m(6´8˝)

3.1 m(10´2˝)

3.6 m(11´9˝) 0.22 m(8-21/32˝)

3.81 m(150˝) 2.29 m(7´6˝)

3.05 m(10´)

4.6 m(15´1˝)

5.4 m(17´8˝) 0.33 m(12-31/32˝)

5.08 m(200˝) 3.05 m(10´)

4.06 m(13´4˝)

6.2 m(20´4˝)

7.3 m(23´11˝) 0.44 m(17-5/16˝)

6.35 m(250˝)

7.62 m(300˝)

3.81 m(12´6˝)

4.57 m(15´)

5.08 m(16´8˝)

6.10 m(20´)

9.1 m(29´10˝)

10.9 m(35´9˝)

0.54 m(21-1/4˝)

0.65 m(25-9/16˝)

Screen size (4:3)

Diagonal

length

Height 

(SH)

Width 

(SW)

Projection distance (L)

Height

position

(H1)

Wide 

(LW)

Telephoto 

(LT)

7.7 m(25´3˝)

9.3 m(30´6˝)

Computer

Connecting to computer

RGB signal cable
(accessory)

Summary of Contents for PTLM1U - LCD PROJECTOR





































Reviews: