Panasonic PTL785U - LCD PROJECTOR UNIT, Operating Instructions Manual

Page: 63 / 88

E
NGLISH
-63
Other
s
Covering the connector panel
When installing the projector to the ceiling, the accessory cable cover can be
used to cover the connectors after removing the cut-away parts.
'
Tighten the screw by turning it
clockwise.
$
Work the cut-away parts back and
forth several times to break the
fixing tabs. Smooth off any jagged
edges if necessary.
#
Use pliers or similar to break the
perforated sections of the cut-
away parts.
%
Pass the mains lead through cut-
away part S, pass the other
cables through cut-away part L,
and then insert the hook1 of the
cable cover into the mounting
holes in the projector.
&
Push in the hook 2 until it locks
into place.
Perforated sections
Hook2
Hook1
Fixing tabs Fixing tabs
Cut-away part S
Screw
Cut-away
part L
Refer to page 62 for details on
removing the cable cover.
NOTE:
B
Do not cover the air inlet ports
when using the cable cover as
stated above.
B
Do not place any heavy objects
on the cable cover to prevent it
from falling.
B
Do not bend the cables greatly,
otherwise it will be difficult to
attach the cable cover.
B
Remove the cable cover when
cleaning or replacing the air filter.