manualshive.com logo in svg

Panasonic PTL785U - LCD PROJECTOR UNIT, Operating Instructions Manual

Share
Download
Panasonic PTL785U - LCD PROJECTOR UNIT Operating Instructions Manual Download Page 20

20-E

NGLISH

Connections

Notes on connections

B

Read the instruction manual for each peripheral device carefully before connecting it.

B

Turn off the power supply for all peripheral devices before making any connections.

B

If the cables necessary for connection are not included with the peripheral device or
available as an option, you may need to prepare a proper cable for the device concerned.

B

If there is a lot of jitter in the video signal, the projected image may flicker. In such
cases, it will be necessary to connect a TBC (time base corrector).

B

Refer to the list on page 70 for details on compatible signals which can be input to
the projector.

B

Only one audio system circuit is available for each of the AUDIO IN L-R connectors for
S-VIDEO/VIDEO signals and the RGB AUDIO IN connector, so if you wish to change
the audio input source, you will need to remove and insert the appropriate plugs.

Connecting to video equipment

D-sub 15-pin (male) - BNCx5 (male) adapter cable 

Red (connect to P

R

signal connector)

Blue (connect to P

B

signal connector)

Green (connect to Y signal connector)

D-sub 9-pin
(male)

DVD player

Audio system

Video deck

Computer for

control use

DVD player

Red (connect to P

R

signal connector)

Blue (connect to P

B

signal connector)

Green (connect to Y signal connector)

DVD player
(with component
video connectors)

BNC/RCA adapter

NOTE:

B

If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while “D.ZOOM”(digital zoom) is
being used, this function will be cancelled.

Summary of Contents for PTL785U - LCD PROJECTOR UNIT

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands