manualshive.com logo in svg

Panasonic PTL785U - LCD PROJECTOR UNIT, Operating Instructions Manual

Share
Download
Panasonic PTL785U - LCD PROJECTOR UNIT Operating Instructions Manual Download Page 29

E

NGLISH

-29

Useful

functions

Turning off the picture and sound
momentarily (SHUTTER)

The “SHUTTER” function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in “SHUTTER” mode than it does
in normal projection mode.

ALL

SET

A

Still picture

B

The picture being projected will be paused.

B

Press the FREEZE button again to cancel the
still picture.

Press the SHUTTER button.

B

The picture and sound will be turned off.

B

Press any button on either the projector or
remote control unit to return to normal operating
mode.

Press the FREEZE button.

Pausing a picture (FREEZE)

Projector control panel

RGB

VIDEO

AUTO SETUP

SHUTTER

INPUT

ALL

SET

A

Summary of Contents for PTL785U - LCD PROJECTOR UNIT

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands