background image

[PICTURE] menu

52 - ENGLISH

Settings

 

[COLOUR MANAGEMENT]

For the selected [PICTURE MODE], you can adjust a 
selected color individually with [CURSOR] mode or adjust 
the six color components (Red, Green, Blue, Cyan, 
Magenta, Yellow) with [RGBCMY] mode. 
Adjustment results can be saved as a profile and called 
later.

 

Create a new profile

Note

 

z

When the input signal is switched while adjusting, 

adjustment details are not  saved.

 

z

If there is another area, which has the exact same or 

similar color as the target on the same screen, these 

colors will be adjusted as well.

 

z

You can adjust all colors except white, gray and black.

 

z

If you edit a single color to be individual different colors, 

the desired color may not be achieved.

 

z

When you execute [COLOUR MANAGEMENT] while a 

3D image is being displayed, only the left eye image is 

displayed.

 

z

Adjusting the selected color (when 

[CURSOR] is selected for [ADJUSTMENT 

MODE])

Select the desired color with a cursor and adjust.

1)   Press the ◄► buttons to select [CURSOR] 

in [ADJUSTMENT MODE].

COLOUR MANAGEMENT
PROFILE

ADJUSTMENT MODE

START ADJUSTMENT
LOG

NORMAL
CURSOR

2)   Press the ▲▼ buttons to select [START 

ADJUSTMENT] and press the <ENTER> 

button.

 

z

The cross cursor 

(A)

 is displayed, and the 

projected image is captured.

  Screen

3)   Move the cursor with the ▲▼◄► buttons 

to the required place to select a color.

 

z

Align the center of the cross cursor on the point 

in the projected image to be adjusted.

4)   Press the <ENTER> button.

 

z

[CURSOR] menu 

(B)

 and the color selected 

(C)

 

are displayed.

 

COLOUR

TINT
BRIGHTNESS

CURSOR

0
0
0

RETURN

DEFAULT

SELECT

ENTER

Screen

Note

 

z

In some cases you may be unable to adjust when the 

very edge point of the projection area is selected.

 

z

You can create a profile only when [ADJUSTMENT 

MODE] is set to either [CURSOR] or [RGBCMY]. A profile 

cannot be created from both adjustments. 

 

z

White, gray and black cannot be edited.

5)   Press the ▲▼ buttons to select a menu 

item and the ◄► buttons to adjust each 

item level.

[COLOUR]

Adjust the vividness of the 

color.

 

z

Setting range:  

−30 to +30

[TINT]

Adjust the color tone.

 

z

Setting range:  

−30 to +30

[BRIGHTNESS]

Adjust the brightness of the 

color.

 

z

Setting range:  

−20 to +20

 

z

The default setting for each item is [0]. 

After adjusting, the post-adjustment color 

(D)

 is 

displayed.

 

COLOUR

TINT
BRIGHTNESS

CURSOR

RETURN

DEFAULT

SELECT

ENTER

0
0
0

Screen

6)   Press the <ENTER> button.

 

z

[PROCESSING] message is displayed for a few 

seconds and the result is stored in [LOG]. 

You can store up to 8 logs under [LOG]. Press 

the <RETURN> or <MENU> button to return 

to the previous menu. Repeat from step 3) to 

store more adjustments.

7)   Press the <RETURN> button or <MENU> 

button twice.

 

z

This returns you to the [COLOUR 
MANAGEMENT] menu.

Summary of Contents for PT_AT6000E















































































































Reviews: