![background image](http://html.mh-extra.com/html/panasonic/pt_at6000e/pt_at6000e_operating-instructions-manual_270757070.webp)
[3D SETTINGS] menu
70 - ENGLISH
Settings
[3D EYEWEAR BRIGHTNESS]
This enables adjusting the brightness for the 3D
Eyewear.
Switch settings
Switch settings
[LIGHT]
[DARK]
[NORMAL]
[LIGHT]
Select to brighten the 3D video display.
[NORMAL]
Select this as standard for 3D viewing
[DARK]
Select to reduce 3D video afterimage.
Note
z
When you switch the brightness of 3D Eyewear, the
screen may momentarily appear jumbled.
[3D IR TRANSMITTER]
This controls the 3D IR Transmitter embedded in this
projector.
Switch settings
Switch settings
[OFF]
[WEAK]
[STRONG]
[MEDIUM]
[STRONG]
This sets the IR output of the 3D IR
Transmitter to high.
Select this when viewing 3D video.
[MEDIUM]
This sets the IR output of the 3D IR
Transmitter to middle. Select this when
the response of the remote control of
the projector or the external device is
poor.
[WEAK]
This sets the IR output of the 3D IR
Transmitter to low.
Select this when the response of the
remote control is poor even when set
to [MEDIUM].
[OFF]
This sets the IR output of the 3D IR
Transmitter to off.
Select this when not viewing 3D video.
Note
z
If you feel that the response of the remote control for
this projector or external devices is poor when using the
built-in 3D IR Transmitter, first set to [MEDIUM]. If no
improvements are seen, set to [WEAK].
z
This menu cannot be used to control the external 3D IR
transmitter (optional accessory).