[DEFAULT]
Factory default setting.
[HIGH]
Becomes a bluish image. Select this when the white areas of the projected image are reddish.
[LOW]
Becomes a reddish image. Select this when the white areas of the projected image are bluish.
[IRIS]
Aperture correction and signal compensation are performed automatically based on the image to result in an image of optimum
contrast.
1) Press
as
to select [IRIS].
2) Press
qw
or the <ENTER> button.
f
The [IRIS] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
No correction.
[ON]
Corrects the aperture.
[ADVANCED MENU]
You can perform more advanced image adjustment.
1) Press
as
to select [ADVANCED MENU].
2) Press the <ENTER> button.
f
The [ADVANCED MENU] screen is displayed.
3) Press
as
to select one item among [CONTRAST R] ~ [BRIGHTNESS B].
4) Press
qw
or the <ENTER> button.
f
The individual adjustment screen of items are displayed.
5) Press
qw
to adjust the value.
Items
Operation
Adjustment
Adjustment range
[CONTRAST R]
Press the
w
button.
Emphasizes red in highlight areas.
-32 ~ +32
Press the
q
button.
Deemphasizes red in highlight areas.
[CONTRAST G]
Press the
w
button.
Emphasizes green in highlight areas.
-32 ~ +32
Press the
q
button.
Deemphasizes green in highlight areas.
[CONTRAST B]
Press the
w
button.
Emphasizes blue in highlight areas.
-32 ~ +32
Press the
q
button.
Deemphasizes blue in highlight areas.
[BRIGHTNESS R]
Press the
w
button.
Emphasizes red in shadow areas.
-32 ~ +32
Press the
q
button.
Deemphasizes red in shadow areas.
[BRIGHTNESS G]
Press the
w
button.
Emphasizes green in shadow areas.
-32 ~ +32
Press the
q
button.
Deemphasizes green in shadow areas.
[BRIGHTNESS B]
Press the
w
button.
Emphasizes blue in shadow areas.
-32 ~ +32
Press the
q
button.
Deemphasizes blue in shadow areas.
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press
as
to select [DAYLIGHT VIEW].
2) Press
qw
or the <ENTER> button.
f
The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Enables auto correction of [DAYLIGHT VIEW]. The brightness of the room is detected by the
luminance sensor, and the vividness of the image is automatically corrected.
[ON]
Enables [DAYLIGHT VIEW].
[OFF]
Disables [DAYLIGHT VIEW].
Chapter 4 Settings - [PICTURE] menu
52 -
ENGLISH
