Contents of E-mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type :
PT-VX431K
Serial No :
000000000
----- E-mail setup data -----
TEMPERATURE WARNING SETUP
MINIMUM TIME at [
30
] minutes interval
INTAKE AIR TEMPERATURE Over [
32
degC /
89
degF ]
ERROR [ OFF ]
LAMP RUNTIME [ OFF ] at REMAIN [
0
] H
LAMP RUNTIME [ OFF ] at REMAIN [
0
] H
INTAKE AIR TEMPERATURE [
ON
]
----- check system -----
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
EXHAUST AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
LAMP STATUS [ OK ]
APERTURE(CONTRAST-SHUTTER) [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE SENSOR [ OK ]
EXHAUST AIR TEMP.SENSOR [ OK ]
AIR FILTER [ OK ]
COVER OPEN [ OK ]
(Error code 00 00 00 00 00 00 00 00)
Intake air temperature : 36 degC / 96 degF
Exhaust air temperature : 33 degC / 91 degF
Optics module temperature : 34 degC / 93 degF
PROJECTOR RUNTIME 5 H
LAMP ECO 0 H
LAMP NORMAL 0 H
LAMP REMAIN 5000 H
-------- Current status ---------
MAIN VERSION 0.16
SUB VERSION 0.03
LAMP STATUS LAMP=ON
INPUT USB DISPLAY
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.22.100
MAC address 00:0E:00:00:00:00
----- Memo -----
104 -
ENGLISH
Chapter 5 Operation of Function - Web control function