Network
ENGLISH -
73
Settings
E-mail set up page (continued)
J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:
Select [NORMAL] or [SIMPLE].
ERROR:
An error is detected by self-diagnosis.
LAMP RUNTIME:
Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:
Intake air temperature has reached the value set in the field.
10
9
Authentication set up page
J
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
1
Select the authentication method specified by
your Internet service provider.
2 Set this if SMTP authentication has been
selected.
3 Enter the IP address or server name of the POP
server. The DNS server must be set if the server
name is entered:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
4
POP/SMTP server user name field
5
POP/SMTP server password field
6 Enter the port number for the SMTP server
(normally “25”).
7 Enter the port number for the POP server
(normally “110”).
8 Button to update settings
8
7
6
5
4
3
2
1
