Sound
52
- ENGLISH
Settings
Sound
Select [Sound] from the Main Menu (see
“Navigating through the menu” on page 37),
then select the item from the sub-menu.
Remote Control
Control Panel
Volume
Press ▲▼ to select [Volume] and then
1 )
press the <ENTER> button.
Press ◄► to adjust the volume.
2 )
Press <ENTER> button to set the volume.
z
Operation
Adjustment
Adjustment
range
Press ►.
turn up the
volume
Maximum
value 63
Press ◄.
turn down the
volume
Minimum
value 0
You can press </–> buttons on the
z
remote control to adjust the volume. Also you
can press the
◄►
on the control panel to
adjust the volume when menu is off.
Mute
Press ▲▼ to select [Mute].
1 )
Press the <ENTER> button to switch
2 )
the mute function [On]/[Off].
Press the <MUTE> button on the remote
z
control also can switch the mute function On/
Off. (
Æ
page 36)
MIC
Press ▲▼ to select [MIC] and then
1 )
press the <ENTER> button.
Press ▲▼ to switch the MIC function
2 )
[On]/[Off].
When [Off] is selected in [MIC], the [MIC gain]
z
is not available.
Connect the computer 2 audio input signals to
z
COMPUTER AUDIO IN 1 terminal as the MIC
function is turned on.
If the MIC function is turned on when
z
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of [MIC gain].
MIC gain
Press ▲▼ to select [MIC gain] and
1 )
then Press the <ENTER> button.
Press ◄► to adjust the MIC mixing
2 )
gain.
Press <ENTER> button to set the [MIC gain].
z
Operation
Adjustment
Adjustment
range
Press ►.
turn up the MIC
mixing gain
Maximum
value 63
Press ◄.
turn down the
MIC mixing gain
Minimum
value 0
In standby mode
This function is used to switch the output sound On/
Off at standby mode.
Press ▲▼ to select [In standby mode]
1 )
and then press the <ENTER> button.
Press ▲▼ to switch [On]/[Off].
2 )
When setting the In standby mode function
z
to [On] and in Standby mode status, sound
volume can be adjusted with
◄►
buttons on
the control panel or </-> buttons on
the remote control.
[MIC] is set to [On] to output MIC sound at
z
standby mode status.
Only the [Standby mode] is set to [Network],
z
[In standby mode] can be selected.
