[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (
x
page 47) for the operation of the menu screen.
f
When the projector is used for the first time Initial password: Press
awsqawsq
in order, and press the <ENTER>
button.
f
After selecting the item, press
asqw
to set.
Attention
f
When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset
password and then continue operations of the [SECURITY] menu.
f
When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f
The entered password is displayed with "
" mark on the screen.
f
An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[PASSWORD]
The [PASSWORD] screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE] in the
[NETWORK] menu is executed.
When the entered password is incorrect, the operation will be restricted to the power standby
<
v
/
b
> button on the control panel or on the remote control.
1) Press
as
to select [PASSWORD].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the security password entry.
[ON]
Enables the security password entry.
Note
f
The [PASSWORD] setting is set to [OFF] by the factory default.
f
Change the password periodically that is hard to guess.
f
The security password is enabled after setting [PASSWORD] to [ON], turning the power off and disconnecting the power
plug from the power outlet.
[PASSWORD CHANGE]
Change the security password.
1) Press
as
to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f
The [PASSWORD CHANGE] screen is displayed.
3) Press
asqw
or number buttons (<1>-<6>) to set the password.
f
Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
76 -
ENGLISH
Chapter 4 Settings - [SECURITY] menu
