3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Enables auto correction of [DAYLIGHT VIEW]. The brightness of the room is detected by the luminance
sensor, and the vividness of the image is automatically corrected.
[ON]
Enables [DAYLIGHT VIEW].
[OFF]
Disables [DAYLIGHT VIEW].
Note
f
[DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to
[REAR/DESK] or [REAR/CEILING].
f
The [AUTO] mode may not function properly if an object is placed on the top of the projector.
[DIGITAL CINEMA REALITY]
(Only for movie-based signal
input
)
You can improve the vertical resolution of 2-2 and 2-3
pull down video
.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i
, S-VIDEO signal,
VIDEO
signal.
1) Press
as
to select [DIGITAL CINEMA REALITY].
2) Press
qw
or the <ENTER> button.
f
The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables [DIGITAL CINEMA REALITY].
[ON]
Enables [DIGITAL CINEMA REALITY].
[NOISE REDUCTION]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press
as
to select [NOISE REDUCTION].
2) Press
qw
or the <ENTER> button.
f
The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables [NOISE REDUCTION].
[ON]
Enables [NOISE REDUCTION].
Attention
f
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,
set it to
[OFF].
[TV-SYSTEM]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is
input. Set the color system matching the input signal.
1) Press
as
to select [TV-SYSTEM].
2) Press
qw
or the <ENTER> button.
f
The [TV-SYSTEM] individual adjustment screen is displayed.
3) Press
qw
to select the color system.
f
The items will switch each time you press the button.
f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],
[SECAM] or
[PAL60].)
54 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu
