Chapter 4
Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
[STATUS]
Display the status of the projector.
1)
Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The
[STATUS]
screen is displayed.
3)
Press
qw
to switch the pages.
f
The page will change each time you press the button.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[INTAKE AIR TEMP.]
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]
Displays the status of the internal temperature of the projector.
[NUMBER OF ENTRY
SIGNAL]
Displays the number of registered signals.
[EMULATE]
Displays the [EMULATE] settings.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the network version of the projector.
Note
f
The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the
[STATUS]
screen.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1)
Press
as
to select [DATE AND TIME].
2) Press the <ENTER> button.
f
The
[DATE AND TIME]
screen is displayed.
3)
Press
as
to select [TIME ZONE].
4)
Press
qw
to switch the item.
Setting the date and time manually
1)
Press
as
to select [DATE AND TIME].
2) Press the <ENTER> button.
f
The
[DATE AND TIME]
screen is displayed.
3)
Press
as
to select [ADJUST CLOCK].
4) Press the <ENTER> button.
f
The
[ADJUST CLOCK]
screen is displayed.
5)
Press
as
to select an item, and press
qw
to set the local date and time.
6)
Press
as
to select [APPLY], and press the <ENTER> button.
f
The setting of the time will be completed.
