manualshive.com logo in svg

Panasonic PT-RZ475EA, Operating Instructions Manual

Share
Download
Panasonic PT-RZ475EA Operating Instructions Manual Download Page 83

Chapter 4

 

Settings — [PROJECTOR SETUP] menu

ENGLISH - 83

Displaying [BRIGHTNESS CONTROL STATUS]

Display the brightness control status.

1) 

Press 

as

 to select [BRIGHTNESS CONTROL].

2)  Press the <ENTER> button.

 

f

The 

[BRIGHTNESS CONTROL]

 screen is displayed.

3) 

Press 

as

 to select [BRIGHTNESS CONTROL STATUS].

4)  Press the <ENTER> button.

 

f

The 

[BRIGHTNESS CONTROL STATUS]

 screen is displayed.

[BRIGHTNESS CONTROL STATUS] screen display example

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to 

[OFF]

The screen shows the status that the brightness control is disabled.

1

RETURN

BRIGHTNESS CONTROL STATUS

MODE

PROJECTOR

OFF

MENU

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to 

[AUTO] and [LINK] is set to [OFF]

The screen shows the status of the brightness control in one 

projector

5

1

6

RETURN

LINK

PROJECTOR

OFF

BRIGHTNESS CONTROL STATUS

MENU

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to 

[AUTO] and [LINK] is set from [GROUP A] to [GROUP D]

The screen shows the status of the brightness control of 

synchronized projectors (up to eight units), including the projector 

being controlled through the on-screen menu.

2

1

3

4

5 

7

8

1:

2:

3:

4:

5:

6:

7:

192. 168. 30.   2

192. 168. 30.   3
192. 168. 30.   4

LINK

UPDATE

PROJECTOR

GROUP A

PROJECTOR2
PROJECTOR3

BRIGHTNESS CONTROL STATUS

MENU SELECT

When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to 

[PC]

5

1

6

RETURN

MODE

PROJECTOR

PC

BRIGHTNESS CONTROL STATUS

MENU

1  Display the name of the projector.
2  Display the synchronized group.
3  Display the IP address of the projector.

4 

Display the names and IP addresses of projectors in same 

group detected over the network.

5  Display the status by color.

Green: There is an allowance for brightness correction.

Yellow: There is little allowance for brightness correction.

Red: There is a brightness control error.

6  Display error detailed messages.
7  Display error messages.

When the message [Failed to apply BRIGHTNESS CONTROL 

to some projectors.] appears, it means that synchronization with 

the projector displayed in red has failed.

Press 

as

 to select the projector displayed in red, and press 

the <ENTER> button to display the error details.

8 

Update to the latest status information.

Summary of Contents for PT-RZ475EA















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands