Chapter 1
Preparation — About your projector
ENGLISH - 23
Note
f
The remote control can be used within a distance of about 15 m (49'2") if pointed directly at the remote control signal receiver. The remote
control can control at angles of up to ± 15° vertically and ± 30° horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
f
The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material.
f
If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Use
it in a place distant from the light source.
f
The power indicator <ON (G)/STANDBY (R)> will flash if the projector receives a remote control signal.
Projector body
1 2 3
4
5
7
6
4
8
9
8
12
11
14
13
9
10
8
5
Front
Side
Rear
8
9
15
Projection direction
Bottom
:
1 Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
2 Light source indicator <LIGHT>
Displays the status of the light source.
3 Temperature indicator <TEMP>
Displays the internal temperature status.
4
Adjustable feet
Adjusts the projection angle.
5
Remote control signal receiver
6
Projection lens
7
Shift cover
Inside the cover is the lens shift adjustment mechanism for
adjusting projection position.
8 Air intake port
9 Air exhaust port
10 Security slot
This security slot is compatible with the Kensington security
cables.
11 Connecting terminals (
x
page 24)
12 <AC IN> terminal
Connect the supplied power cord.
13 <MAIN POWER> switch
Turns on/off the main power.
14 Control panel (
x
page 24)
15 Burglar hook port
Attaches a burglar prevention cable, etc.
